Home Page

TABLE 1.37 FOREIGN METRIC GEAR STANDARDS 

 AUSTRALIA

ASB62    1965
AS B 66  1969 
AS B 214 1966
ASB2I7   1966
AS 1637 		 Bevel gears
 Worm gears (inch series)
 Geometrical dimensions for worm gears — Units
 Glossary for gearing
 International gear notation symbols for geometric data
 (similar to ISO 701)

 FRANCE

NF E 23-001 1972
NF E 23-002 1972
NF E 23-005 1965
NF E 23-006 1967
NF E 23-011 1972

NF E 23-012 1972

NF L 32-611 1955 		 Glossary of gears (similar to ISO 1122)
  Glossary of worm gears
  Gearing — Symbols (similar to ISO 701)
  Tolerances for spur gears with Involute teeth (similar to ISO 1328)
  Cylindrical gears for general and heavy engineering — Basic
 rack and modules (similar to ISO 467 and ISO 53) 
Cylindrical gears — Information to be given to the manufacturer by the producer
Calculating spur gears to NFL 32-610

GERMANY - DIN (Deutsches Institut fόr Normung) 

DIN 37 12.61
DIN 780 Pt 1 05.77 
DIN 780 P12 05.77

DIN 867 02.88

DIN 868 12.76

DIN 3961 08.78
DIN 3962 Pt 1 08.78

DIN 3962 Pt 2 08.78

DIN 3962 Pt 3 08.78

DIN 3963 08.78

DIN 3964 11 .80

DIN 3965 Pt 1 08.86
DIN 3965 Pt 2 08.86
DIN 3965 Pt 3 08.86

DIN 3965 Pt 4• 08.86

DIN 3966 Pt 1 08.78

DIN 3966 Pt 2 08.78

DIN 3967 08.78

DIN 3970 Pt 1 11.74

DIN 3910 Pt 2 1114		  Conventional and simplified representation of gears and gear pairs [4]
  Series of modules for gears — Modules for spur gears [4]
  Series of modules for gears — Modules for cylindrical worm gear 
 transmissions [4]
  Basic rack tooth profiles for involute teeth of cylindrical gears for
 general and heavy engineering [5]
  General definitions and specification factors for gears, gear pairs and
 gear trains [11]
  Tolerances for cylindrical gear teeth — Bases [8]
  Tolerances for cylindrical gear teeth — Tolerances for deviations of
 individual parameters [11]
  Tolerances for cylindrical gear teeth — Tolerances for tooth trace
 deviations (4] 
 Tolerances for cylindrical gear teeth — Tolerances for pitch-span
 deviations [4]
  Tolerances for cylindrical gear teeth— Tolerances far working deviations
 [11]
  Deviations of shaft center distances and shaft position tolerances of
 casings for cylindrical gears [4]
 Tolerancing of bevel gears — Basic concepts (5]
  Tolerancing of bevel gears — Tolerances for individual parameters [11]
 Tolerancing of bevel gears — Tolerances for tangential composite errors
 [11]
 Tolerancing of bevel gears — Tolerances for shaft angle errors and axes
 intersection point deviations [5]
  Information on gear teeth in drawings — Information on involute teeth
 for cylindrical gears [7]
  Information on gear teeth in drawings — Information on straight bevel
 gear teeth [6]
 System of gear fits - Backlash, tooth thickness allowances, tooth
 thickness tolerances - Principles [12]
  Master gears for checking spur gears - Gear blank and tooth
 system [8]
  Master gears for ducking spur gears - Receiving arbors [4]

T127  Next Page  Prev Page