T-219
(d) Mold Open
Fig. 18-14 (Cont.) Three-Plate Mold
(c)
Gate and Runner Exposed
Gate and Runner
"A" Plate
"A" Chase
"B" Chase
"B" Plate
Sprue Distributor Plate
Stripper Bolt which
caused the motion
of "A" Plate
Front Plate
"X" Plate
Stripper Bolt which caused
the separation of "X" Plate
from the Front Plate
Gate and Runner
separated from Sucker Pin
by motion of "X" Plate and
ejected by air
Gear stripped off Core Pin
Ejector Retainer Bushing
Ejector Retainer Plate
Ejector Plate
Back Plate
Core Pin Retainer Plate
Ejector Rod
