T-232
REFERENCES AND LITERATURE OF GENERAL INTEREST
1.
Adams, Clifford E., Plastic Gearing, Marcel Dekker, Inc. New York, 1986.
2.
Buckingham, Earle, Manual of Gear Design, 3 Vols., Industrial Press, New York, 1935.
3.
Celanese Plastics and Specialties Co., Design and Production of Gears in CELCON
Acetal Copolymer, Chatham, New Jersey, 1979.
4.
Chironis, N.P. (ed.), Gear Design and Application, McGraw-Hill, New York, 1967.
5.
E. I. DuPont de Nemours and Co., Gears of 'DELRIN' and 'ZYTEL', Wilmington,
Delaware.
6.
E. I. DuPont de Nemours and Co., DELRIN Design Handbook, Wilmington, Delaware,
1967.
7.
Kverneland, Knut O., (ed.), World Metric Standards for Engineering, Industrial Press,
New York, 1978.
8.
Martin, L. D., “Injection Molded Plastic Gears”, Plastic Design and Processing Magazine,
Part 1, pp. 38-45, August 1968.
9.
Merritt, H. E., Gears, Pittman & Sons, London, 1955.
10. Michalec, G. W., Precision Gearing: Theory and Practice, John Wiley & Sons, New
York, 1966.
11. Shigley, J. E., Mechanical Engineering Design, McGraw-Hill, New York, 1963.
12. Steeds, W., Involute Gears, Longmans, Green and Co., London, 1948.
13. Technomix Publishing, Handbook of Practical Gear Design, Lancaster, Pa; reprinted
1994.
14. The Polymer Corp., Nylatron Nylon Gear Design Manual, Reading, Pa.
15. Townsend, Dennis P., (ed.), Dudley's Gear Handbook ; 2nd edition, McGraw-Hill,
New York, 1991.
16. Woodbury, R. W., History of Gear Cutting Machines, M.I.T. Technology Press,
Cambridge, Massachusetts.
