Home > Reference Library

• ELEMENTS OF METRIC GEAR TECHNOLOGY

• Clutch Applications: >> Download

• Synchronous Belt Failure Analysis Guide:
  Provided by Gates®: >> Download

• Design & Application of Small Standardized
  Components: >> Couplings & Universal Joints

• Power Transmission Engineering Article:
  >> Criteria for Power Transmission Couplings

• ESCAP® Ironless Rotor D.C. Micromotors
  and Step Motors:
  >> Data Book Section Four Motors

• HANDBOOK OF TIMING BELTS & PULLEYS
  1. Introduction
  2. Comparative Graphs
  3. Drive Comparative Graphs
  4. Belt Configurations & Construction
  5. Belt Tooth Profiles
  6. Pulley Pitch and Outside Diameters
  7. Design & Installation Suggestions
  8. Belt Tensioning & Alignment
  9. Idler Usage
10. Belt Pull & Bearing Loads
11. Standards Applicable to Belts
12. Standards Applicable to Pulleys & Flanges
13. Double-Sided Twin Power® Belt Tolerance
14. Long Length Timing Belt Stock Specifications
15. Design Aids on Internet | www.sdp-si.com
16. Drive Ratio Tables
17. Center Distance Formulas